Simms’ highest-tech, hardest charging wader — the USA-made G4Z Stockingfoot brings best-in-class waterproof breathability, rugged durability and unmatched comfort to the remote coordinates and unforgiving conditions you call home.
FABRIC TECH:
Upper: 3-layer GORE-TEX Pro
Lower: 4-layer GORE-TEX Pro
Stockingfoot & Gravel Guard: 100% Neoprene
GORE-TEX® PRO SHELL outerwear is waterproof, exceptionally lightweight and offers the ultimate in breathability, durability and extended comfort. Constructed with a woven backer, GORE-TEX® Pro Shell garments slide easily over other layers and offer exceptional tear strength and internal abrasion-resistance. The GORE-TEX® membrane is the heart of all GORE -TEX® products. The GORE-TEX® membrane contains 9 billion microscopic pores per square inch. These pores are so small that water droplets cannot get through but water vapor can still escape. Water from the outside cannot penetrate and cold winds cannot pass through, but perspiration can escape easily, keeping you dry and comfortable all day. GORE-TEX® fabrics are created by integrating the GORE-TEX® membrane between an outer fabric and lining.
Made with hands, heart and soul in the USA of imported materials. Simms proudly manufacturers waders in our Bozeman, Montana factory.
The #1 tip to prolonging the life of a wader is drying your waders. It is important to dry your waders out after each use. We recommend drying the inside first (if damp) and then the outside. When drying the outside you can pull your gravel guards up until the feet are dry and then flip them down to dry the rest of the wader
Washing - Use a front load machine or hand wash. Use cold water and normal detergent that does not contain bleach. Once you have washed the waders make sure you dry them properly start by drying the inside first. Never put your waders in the dryer, the heat will adversely affect the seam tape on your waders and will void your warranty.
Fit - We offer more sizes than anyone, a good fit goes a long way to extending the life of your wader. Make it clear that people should use their exact measurements as we have already provided extra room for layering and movement.
General Care - Do not store inside your car for long periods of time excess heat will damage your waders.
Use A Mat - Always put your waders on using a protective mat to shield the neoprene feet from rocks.
Proper Layering - Do not wear jeans under your waders. Jeans are highly abrasive wearing on your waders from the inside out. More importantly jeans and sweatpants do not transfer moisture away from the body. Use proper layering (to view our layering collection, go here). Using layers such as these will help wick moisture away from your body and assist in the waders ability to breathe.
Stains - most stain removers will work fine on our waders. As long as the stain remover does not contain bleach you should be ok.
GORE-TEX® Pro Shell
Made in USA
