The ultimate hybrid. A fusion between the free-form structures of a cast spool and the mechanical integrity of a CNC-machined case, the Remix S HD is the ultimate hybrid. Machined from bar-stock aluminum, the frame delivers maximum structural rigidity and durability all wrapped in a harder, brighter, anodized finish. The spool (compatible with the Liquid S), is pressure-cast with pocket spar design and increased strength-to-weight ratio. Remix S improves on the legacy of the first generation Remix with larger diameters, larger arbors, greater strength, and a larger, easy to grip drag knob. Remix S HD brings an unmatched level of quality in its class. The result is high performance. Reliability. Quality assurance. Plus, undeniable knockout looks.
| Item | Diameter | Width | Weight | Rod wt | Line capacity |
|---|---|---|---|---|---|
| Remix S HD -7+ | 101mm | 29mm | 165gr | WF 6-8 | WF8 180 yds 20# |
| Remix S HD -9+ | 104mm | 32mm | 212gr | WF 8-10 | WF10 200 yds 30# |
| Remix S HD -11+ | 112mm | 34mm | 242gr | WF 10-12 | WF10 240 yds 30# |
Do not remove the drag knob or the two-holed nut in the center of the drag knob for any reason.
Always ensure the Gland Cap is tight, especially before using the reel the first time or after reversing the retrieve direction. Be sure to periodically check that the cap is on securely; it should always be firmly tightened by hand, do not use a tool. The Gland Cap should seat completely on the drag cylinder when installed properly.
The drag system is meant to operate lubrication free. Do not use any type of oil or lubricant in or around the drag system. A small amount of WD-40 may be applied to the retrieve handle in order to remove any dirt build up between the handle and the handle shaft.
Freshwater Use: Occasionally rinse your reel thoroughly under fresh running water and wipe the spool and frame to remove any debris or dirt build up. Be sure to wipe down the spindle on the spool and keep it free of debris.
Saltwater Use:
Be sure to rinse the reel under fresh running water after every use in a salt environment. Occasionally rinse the drag by doing the following:
Remove the spool, unscrew the gland cap and remove the red and silver clutch assembly.
Rinse all components including the inside of the drag cylinder thoroughly with fresh running water.
Allow all components to dry completely before reassembly.
