Home

Lamson Speedster Grey/Orange

Lamson Speedster Grey/Orange

€ 369,00

Go full throttle. A special edition reel, this Speedster is finished in an anodized black color with orange accents on the drag knob and drag cassette to add a little extra flair. A super-high retrieve rate reel, the Speedster features a narrower spool, inboard mounted handle, and an outer diameter significantly larger than our highest performing reels. The narrow spool prevents line barreling, while the inboard handle and added circumference improve retrieve rate. Rev these features up with our classic Waterworks-Lamson styling and attention to detail—plus our time-tested, maintenance-free drag system—and you have what the name implies: a reel hot rod.

  • format: Super Arbor
  • materials: Machined 6061 Aluminum, Stainless Steel
  • finish: Hard Alox
  • drag: Sealed Conical Drag
  • US Made, Idaho Built
Article #:N/A
Availability:Yes

Share:

Item Diameter Width Weight Rod wt Line capacity
Speedster 1,5 89mm 24mm 113gr WF 3,4 WF4 100 yds 20#
Speedster 2 95mm 24mm 120gr WF 5,6 WF6 100 yds 20#
Speedster 3 101mm 26mm 149gr WF 6,7 WF7 150 yds 20#

  1. Do not remove the drag knob or the two-holed nut in the center of the drag knob for any reason.

  2. Always ensure the Gland Cap is tight, especially before using the reel the first time or after reversing the retrieve direction. Be sure to periodically check that the cap is on securely; it should always be firmly tightened by hand, do not use a tool. The Gland Cap should seat completely on the drag cylinder when installed properly.

  3. The drag system is meant to operate lubrication free. Do not use any type of oil or lubricant in or around the drag system. A small amount of WD-40 may be applied to the retrieve handle in order to remove any dirt build up between the handle and the handle shaft.

  4. Freshwater Use: Occasionally rinse your reel thoroughly under fresh running water and wipe the spool and frame to remove any debris or dirt build up. Be sure to wipe down the spindle on the spool and keep it free of debris.

Saltwater Use:

Be sure to rinse the reel under fresh running water after every use in a salt environment. Occasionally rinse the drag by doing the following:

  1. Remove the spool, unscrew the gland cap and remove the red and silver clutch assembly.

  2. Rinse all components including the inside of the drag cylinder thoroughly with fresh running water.

  3. Allow all components to dry completely before reassembly.

Related categories

You May Also Like