Home

Lamson Remix Sublime

Lamson Remix Sublime

€ 199,00

A fusion between the free-form structures of a cast spool and the mechanical integrity of a CNC-machined case, Remix is a hybrid. The case, CNC-machined here in the U.S. from 6061 bar-stock aluminum, delivers maximum structural rigidity and durability all wrapped in a harder, brighter finish. The spool, pressure cast with radiused compound curves, near zero-radius inside corners and a precise fit and finish. Remix brings together the best of CNC machining and pressure-cast technologies to deliver an unprecedented level of quality for a good price. In addition to the US-made case, all critical drag components are CNC-machined here in the U.S. And like Liquid, Remix reels are assembled in Boise by our skilled and experienced team. The result of this Remix? High performance, reliability, quality assurance and sex appeal.

  • Format: Large Arbor
  • Materials: Machined Aluminum, stainless steel
  • Finish: Type 2
  • Weight: 135 g / 5-6 wt
Article #:N/A
Availability:Yes
Categories:  WW-L , WW-L LAMSON REMIX , SUBLIME

Share:

Item Diameter Width Weight Rod wt Line capacity
Remix 1.5 85mm 25mm 121gr WF 3,4 WF4 100 yds 20#
Remix 2 92mm 25,5mm 135gr WF 5,6 WF6 100 yds 20#
Remix 3.5 98mm 29mm 162gr WF 8,9 WF8 200 yds 20#
Remix 4* 118mm 34,5mm 200g WF 9,10 WF10 250yds #30

  1. Do not remove the drag knob or the two-holed nut in the center of the drag knob for any reason.

  2. Always ensure the Gland Cap is tight, especially before using the reel the first time or after reversing the retrieve direction. Be sure to periodically check that the cap is on securely; it should always be firmly tightened by hand, do not use a tool. The Gland Cap should seat completely on the drag cylinder when installed properly.

  3. The drag system is meant to operate lubrication free. Do not use any type of oil or lubricant in or around the drag system. A small amount of WD-40 may be applied to the retrieve handle in order to remove any dirt build up between the handle and the handle shaft.

  4. Freshwater Use: Occasionally rinse your reel thoroughly under fresh running water and wipe the spool and frame to remove any debris or dirt build up. Be sure to wipe down the spindle on the spool and keep it free of debris.

Saltwater Use:

Be sure to rinse the reel under fresh running water after every use in a salt environment. Occasionally rinse the drag by doing the following:

  1. Remove the spool, unscrew the gland cap and remove the red and silver clutch assembly.

  2. Rinse all components including the inside of the drag cylinder thoroughly with fresh running water.

  3. Allow all components to dry completely before reassembly.

Related products

You May Also Like